DOI 10.17586/0021-3454-2020-63-6-528-537
UDC 681.5.015.8
MODIFICATION OF THE METHOD OF PARAMETRIC IDENTIFICATION OF A SYNCHRONOUS MACHINE WITH PERMANENT MAGNETS
Wroclaw University of Science and Technology, Department of Electrical Machines, Drives and Measurements;
S. Y. Lovlin
ITMO University, Saint Petersburg, 197101, Russian Federation; Associate Professor
M. . Tsvetkova
ITMO University; student
Кононова М. С.
Университет ИТМО;
A. G. Mamatov
ITMO University, Department of Electrotechnics and Precision Electromechanical Systems; Post-Graduate Student
Read the full article
Abstract. A modified method of identification of electrical parameters of a servo drive and a PWM inverter, based on the least square method, is proposed. The proposed identification method uses a model that considers the effect of “dead time” and the voltage drop on the power switches of the converter. The method accuracy is improved by separating the identification of the static transmission coefficient and the electromagnetic time constant into two stages, in each of the stages only one parameter is evaluated. The new method is shown to achieve a higher accuracy of parameter estimation compared to existing methods using a linear model of servo drive.
References:
1. Sadovnikov M.A., Tomasov V.S., Tolmachev V.A. Journal of Instrument Engineering, 2011, no. 6(54), pp. 81–86. (in Russ.) 2. Orlovska-Koval'ska T., Lovlin S.Yu., Tsvetkova M.Kh., Abdullin A.A., Mamatov A.G. Journal of Instrument Engineering, 2019, no. 6(62), pp. 576–584 (in Russ.) 3. Lovlin S.Y., Tsvetkova M.H., Subbotin D.A. Advances in Automatic Control: Proceedings of the 16th International Conference on Automatic Control, Modelling & Simulation (ACMOS '14), 2014, nо. 35, рр. 199-206. 4. Tomasov V.S., Lovlin S.Yu., Tushev S.A., Smirnov N.A. Vestnik IGEU, 2013, no. 1, pp. 84–87. (in Russ.) 5. Jul-Ki Seok, Seung-Ill Moon and Seung-Ki Sul. IEEE Transactions on Energy Conversion, 1997, no. 2(12), pp. 127–132. 6. Si G., Shen Z., Zhang Z. and Kennel R. 2016 IEEE 2nd Annual Southern Power Electronics Conference (SPEC), Auckland, 2016, pp. 1–6. 7. Anuchin A., Gulyaeva M., Briz F. and Gulyaev I. 2017 International Conference on Modern Power Systems (MPS), Cluj-Napoca, 2017, pp. 1–6. 8. Munoz-Garcia A. and Lipo T.A. Proc. IEEE Applicat. Power Electon. Conf., 1998, pp. 95–100. 9. Dilys J. and Baskys A. 2017 Open Conference of Electrical, Electronic and Information Sciences (eStream), Vilnius, 2017, pp. 1–4. 10. Delgado F.A.P., Reed D.M., Hofmann H.F. and Sun J. 2018 IEEE Conference on Control Technology and Applications (CCTA), Copenhagen, 2018, pp. 1185–1190. 11. Yang S., Hsu Y., Chou P., Chen G. and Jian D. IEEE Transactions on Industrial Electronics, 2018, no. 5(65), pp. 4039–-4050. 12. Bedetti N., Calligaro S. and Petrella R. IEEE Transactions on Industry Applications, 2015, no. 5(51), pp. 3954–3964. Модификация метода параметрической идентификации синхронной машины 537 ИЗВ. ВУЗОВ. ПРИБОРОСТРОЕНИЕ. 2020. Т. 63, № 6 13. Townsend C.D., Mirzaeva G. and Goodwin G.C. IEEE Transactions on Power Electronics, 2017, no. 9(32), pp. 7325–7337. 14. Ljung L. System Identification: Theory for the User, MIT Press, Cambridge, MA, 1980. 15. Omrane I., Etien E., Bachelier O., and Dib W. Proc. 39th Annu. IEEE IECON, 2013, pp. 2578–2583.
