ISSN 0021-3454 (print version)
ISSN 2500-0381 (online version)
Menu

4
Issue
vol 67 / April, 2024
Article

DOI 10.17586/0021-3454-2020-63-8-711-719

UDC 621.3.07

MEASURING THE DERIVATIVE OF CURRENT USING A DELTA-SIGMA MODULATOR FOR SENSORLESS CONTROL OF A TRACTION ELECTRIC DRIVE

A. S. Anuchin
National Research University “Moscow Power Engineering Institute”, Moscow, 111250, Russian Federation; Head of Chair


E. O. Stolyarov
National Research University “Moscow Power Engineering Institute” (MEI), Moscow, 111250, Russian Federation; PhD Student


G. L. Demidova
ITMO University, Saint Petersburg, 197101, Russian Federation; Associate professor


Y. Vagapov
Wrexham Glyndwr University, Wrexham, 1LL11 2AW, UK; Lecturer


A. A. Zharkov
National Research University “Moscow Power Engineering Institute” (MEI), Moscow, 111250, Russian Federation;R&D Company “Vector”, LLC, Moscow, 111396, Russian Federation; Assistant Professor, Chief Designer


D. K. Surnin
Moscow Power Engineering Institute, Department of Electric Drives;


Read the full article 

Abstract. A method of direct measurement of the derivative of current necessary to determine the induct-ances in electric motors for reliable and efficient operation of sensorless control in AC electric drives is considered. The method is based on measuring the voltage drop across a calibrated inductance installed directly in the converter power circuit. To improve the method accuracy and reduce the effects of transi-ents and interference, a delta-sigma modulator is used to measure the voltage drop. Experimental re-sults obtained for three different inductive measuring shunts are presented.
Keywords: derivative of current, electric drive, sensorless control, delta-sigma modulator, inductive shunt

References:
  1. Jarzębowicz L. Proc. 2011 IEEE Int. Symp. on Industrial Electronics, Gdansk, Poland, 27–30 June 2011, pp. 733–738.
  2. Foo G., Xinan Z., Maskell D.L., and Vilathgamuwa D.M. Proc. 2015 IEEE Symp. on Sensorless Control for Electrical Drives (SLED), Sydney, Australia, 7–8 June 2015, pp. 1–6.
  3. Brando G., Dannier A., Del Pizzo A., Rizzo R., and Spina I. IET Power Electronics, 2016, no. 11(9), pp. 2249–2261.
  4. Lashkevich M., Anuchin A., Aliamkin D., and Briz F. Proc. 43rd Annu. Conf. IEEE Industrial Electronics Society IECON-2017, Beijing, China, 29 Oct.–1 Nov. 2017, pp. 8225–8229.
  5. Aliamkin D., Anuchin A., Lashkevich M., and Briz F. Proc. 42nd Annu. Conf. IEEE Industrial Electronics Society IECON-2016, Florence, Italy, 23–26 Oct. 2016, pp. 2917–2922.
  6. Schroedl M. Proc. 31st IEEE Annu. Meeting Industry Applications Conf. IAS 96, San Diego, CA, USA, 6–10 Oct. 1996, vol. 1, pp. 270–277.
  7. Bui M.X., Guan D.Q., Xiao D., and Rahman M.F. Proc. 19th Int. Conf. on Electrical Machines and Sys-tems (ICEMS), Chiba, Japan, 13–16 Nov. 2016, pp. 1–6.
  8. Hua Y., Sumner M., Asher G., and Gao Q. Proc. 13th European Conf. on Power Electronics and Appli-cations, Barcelona, Spain, 8–10 Sept. 2009, pp. 1–10.
  9. Bui M.X., Guan D., Xiao D., and Rahman M.F. IEEE Trans. on Industrial Electronics, 2018. DOI: 10.1109/TIE.2018.2823663.
  10. Duan Y., and Sumner M. Proc. 7th Int. Power Electronics and Motion Control Conf., Harbin, China, 2–5 June 2012, vol. 2, pp. 1193–1200.
  11. Liu C., Yi H., Liu J.-G., and Zhang Q. Proc. Int. Conf. for Power Electronics, Intelligent Motion, Renewa-ble Energy and Energy Management PCIM Europe 2015, Nuremberg, Germany, 19–20 May 2015, pp. 1–8.
  12. Anuchin A., Zharkov A., Shpak D., Aliamkin D., and Vagapov Y. Proc. 9th IET Int. Conf. on Power Elec-tronics, Machines and Drives PEMD-2018, Liverpool, UK, 17–19 April 2018, pp. 1-5.
  13. Anuchin A., Surnin D., and Lashkevich M. Proc. 17th Int. Ural Conf. on AC Electric Drives (ACED), Ekaterinburg, Russia, 26–30 March 2018, pp. 1–5.
  14. AMC1305x Small, High-Precision, Reinforced Isolated Delta-Sigma Modulators, Texas Instruments, TX, USA, Datasheet SBAS654F, June 2014, Rev. March 2017.
  15. Oljaca M., and Hendrick T. Combining the ADS1202 with an FPGA digital filter for current measure-ment in motor control applications, Texas Instruments, Dallas, TX, USA, Application Rep. SBAA094, June 2003.