ISSN 0021-3454 (print version)
ISSN 2500-0381 (online version)
Menu

4
Issue
vol 63 / April, 2020
Article

DOI 10.17586/0021-3454-2016-59-8-625-629

UDC 621.833 + 621.8.024.4

TOOTHED-ROD BEVEL GEARS

B. P. Timofeev
ITMO University, Department of Mechatronics; Professor


M. Y. Sachkov
ITMO University, Saint Petersburg, 197101, Russian Federation; Senior lecturer


Read the full article 

Abstract. Conical toothed-rod gears with intersecting orthogonal axes are considered. The absence of edge contacts at the rods re-pairing is confirmed by the study. The choice of the minimal number of rods is justified on the base of on the basis of continuity of the move function.
Keywords: toothed-rod bevel gear, edge contact, the position error function, active acting line, speed error

References:
  1. Denisov V.M. Machines and Tooling, 1963, no. 8, pp. 17–21. (in Russ.)
  2. Kabatov N.F., Lopato G.A. Konicheskie kolesa s krugovymi zub'yami (Conical Wheels with Circular Teeth), Moscow, 1966, 300 р. (in Russ.)
  3. Segal' M.G. Journal of Machinery Manufacture and Reliability, 1970, no. 1, pp. 56–63. (in Russ.)
  4. Syzrantsev V.N. Teoriya i raschet peredatochnykh mekhanizmov (Theory and Calculation of Transmission Gears), Khabarovsk, 1975, рр. 32–41. (in Russ.)
  5. Timofeev B.P. Sintez i analiz obkatnykh konicheskikh koles s krugovymi zub'yami (Synthesis and the Analysis of the Conic Wheels Received by a Running with Circular Teeth), Candidate’s thesis, Leningrad, 1969 (in Russ.)
  6. Sheveleva G.I. “Zatseplenie priblizhennykh konicheskikh koles” v “Teoriya peredach v mashinakh” (“Gearing of Approximate Conic Wheels” in “Theory of gears in cars”), Moscow, 1966, рр. 38–48. (in Russ.)
  7. Babichev D.T. Voprosy issledovaniya geometrii i kinematiki prostranstvennykh zatsepleniy (The study of the Geometry and Kinematics of Spatial Gearing), Candidate’s thesis, Novocherkassk, 1971. (in Russ.)
  8. Timofeev B.P., Sachkov M.Yu. Izv. vuzov. Priborostroenie, 2015, no. 6(58), pp. 492–497. (in Russ.)
  9. Patent RU 146159, F16H 55/10 F15H 55/17, Koleso dlya peredachi vrashchatel'nogo dvizheniya (Wheel for Transmitting Rotary Motion), Timofeev B.P., Sachkov M.Yu., Priority 19.05.2014; Published 10.10.2014. Bull. 28. (in Russ.)
  10. Litvin F.L. Proektirovanie mekhanizmov i detaley priborov (Design of Mechanisms and Parts of Devices), Leningrad, 1973, 696 р. (in Russ.)