ISSN 0021-3454 (print version)
ISSN 2500-0381 (online version)

vol 63 / August, 2020

DOI 10.17586/0021-3454-2019-62-2-178-184

UDC 004.62


E. B. Romanova
ITMO University, Saint Petersburg, 197101, Russian Federation; Associate professor

P. A. Gagarinov
ITMO University, Department of Metrological Support;

Abstract. The process of integrating two CAD systems is considered, Altium Designer and Solid Edge, is considered from the point of view of desirable reduction of terms of designing of electronic equipment. The format of three-dimensional models is studied for the purpose of conversion from ECAD to MCAD and the further design of electronic equipment and two-dimensional models are investigated for the purpose of conversion from ECAD to MCAD for registration of the design documentation. Recommendations on export settings in the CAD are formulated and the ways to further development of the model for the design engineering documentation according to GOST are suggested. Application of the results are expected to allow to quickly draw up design documentation for GOST ESKD and perform end-to-end design of electronic equipment, including different types of printed circuit boards. As a result, it may reduce the design time, reduce the number of errors in the end-to-end design, comply with GOST and improve the efficiency of using CAD.
Keywords: Altium Designer, Solid Edge, CAD, MCAD, ECAD

  1. (in Russ.)
  2. (in Russ.)
  3. Letunovskiy D.S., Romanova E.B. Almanac of scientific works of young scientists of ITMO University, 2016, vol. 3, рр. 121–123. (in Russ.)
  4. Kirkwood R., Sherwood J.A. Engineering with Computers, 2018, no. 1(34), DOI: 10.1007/s00366-017-0516-z.
  5. Emmer C., Frohlich A., Jakel V., Stjepandic J. Applied Mechanics and Materials, 2014, vol. 635–637, рр. 616–620. DOI:10.3233/978-1-61499-440-4-587.
  6. Mandavia H. Printed Circuit Design and Fab/Circuits Assembly, 2013, no. 11(30), pp. 26–28.
  7. Romanova E.B., Trifonova T.A. Journal of Instrument Engineering, 2016, no. 4(59), pp. 288–293, DOI: 10.17586/0021-3454-2016-59-4-288-293. (in Russ.)
  8. Romanova E.B., Kuznetsov R.V. Journal of Instrument Engineering, 2017, no. 1(60), pp. 63–67. (in Russ.)
  9. Kehmeier D. Printed Circuit Design and Fab/Circuits Assembly, 2012, no. 29, pp. 33–37.
  10. Venu B., Komma V.R. Proceedings 2017 International Conference on Advances in Mechanical, Industrial, Automation and Management Systems, AMIAMS 2017, 2017, no. 8069227, рр. 291–295.
  11. Sabunin A.E. Altium Designer. Novyye resheniya v proyektirovanii elektronnykh ustroystv (Altium De-signer. New Solutions in the Design of Electronic Devices), Moscow, 2009, 432. р. (in Russ.)
  12. Shakhnov V.A., Zinchenko L.A., Solov’yev V.A., Kurnosenko A.E. Osnovy konstruirovaniya v Solid Edge. Posobiye po proyektirovaniyu izdeliy v priborostroyenii (Design Basics in Solid Edge. Manual for the Design of Products in the Instrument Industry), Moscow, 2014, 272 р. (in Russ.)
  13. Sukhodol’skiy V.Yu. SAPR i grafika, 2011, no. 8, pp. 45–49. (in Russ.)
  14. Chirikov E. CADmaster, 2014, no. 2, pp. 78–83. (in Russ.)
  15. vanova N.Yu., Romanova E.B. Instrumental’nyye sredstva konstruktorskogo proyektirovaniya elek-tronnykh sredstv (Tools of Design Design of Electronic Means), St. Petersburg, 2013, 52 р. (in Russ.)