ISSN 0021-3454 (print version)
ISSN 2500-0381 (online version)

vol 63 / December, 2020

DOI 10.17586/0021-3454-2019-62-8-749-757

UDC 681.2.083


V. S. Zavyalov
ITMO University;

N. K. Maltseva
ITMO University, Department of Optical-Electronic Devices and Systems;

Read the full article 

Abstract. A control over parameters of the internal special thread of the nut part included in the design of a roller screw transmission of an electromechanical drive is a difficult metrological task and is possible only using modern coordinate measuring equipment. The main problems associated with the control of the parameters of high-precision internal thread are considered. Methods of controlling the parameters of the internal thread are analyzed, measuring equipment that meets the accuracy requirements is selected, a method for evaluating the parameters of the internal special thread of the nut part is developed. The presented technique allows a full assessment of the thread parameters (pitch, average diameter, and the profile in axial section) based on the use of a contour meter with a double-sided probe. An algorithm of the analysis of the thread contour using the measured parameters is described.
Keywords: thread control, thread pitch, mean thread diameter, contour meter, roller screw drive, electromechanical actuator

  1. Blinov D.S. et al. Aerospace Defense Herald, 2017, no. 1, pp. 66–72. (in Russ.)
  2. Yushkov K.S., Yur'yeva R.A. Almanac of scientific works of young scientists of ITMO University, 2016, no. 5, pp. 311–313. (in Russ.)
  3. Zenkina Ya.P. Politechnical student journal, 2017, no. 8(13), pp. 8. (in Russ.)
  4. Yur'yeva R.A., Mal'tseva N.K., Kul'pina A.D., Yushkov K.S., Ivanova A.S Science and Business: Ways of Development, 2015, no. 10, pp. 21–23. (in Russ.)
  5. Kozyrev V.V. Konstruktsii rolikovintovykh peredach i metodika ikh proyektirovaniya (Designs of Roller Helical Gears and Methods of Their Design), Vladimir, 2004, 100 р. (in Russ.)
  6. Kozyrev V.V. Konstruktsii, teoriya i metodika proyektirovaniya i issledovaniya planetarnykh peredach vint-gayka s rez'bovymi rolikami i mekhatronnykh moduley na ikh baze (Designs, Theory and Methodology for the Design and Study of planetary screw-nut Gears with Threaded Rollers and Mechatronic Modules Based on Them), Vladimir, 2011, 238 р. (in Russ.)
  7. Shinakov I.V., Zhdanov A.V., Kuznetsova S.V. Fundamental research, 2012, no. 3, pp. 145–148. (in Russ.)
  8. Blinov D.S. Science & Education, Bauman Moscow State Technical University, 2015, no. 1, pp. 12–29 (in Russ.)
  9. Blinov D.S., Ryakhovskiy O.A., Sokolov P.A. et al. Vestnik mashinostroyeniya, 1998, no. 7, pp. 26–29. (in Russ.)
  10. Morozov V.V. Rolikovintovyye mekhanizmy. Kinematicheskiye kharakteristiki (Rollerscrew Mechanisms. Kinematic Characteristics), Vladimir, 2005, 78 р. (in Russ.)
  11. Blinov D.S., Morozov M.I. Proceedings of Higher Educational Institutions. Маchine Building, 2013, no. 3, pp. 62–72. (in Russ.)
  12. Blinov D.S., Koloboev A.Yu., Dikun E.V. Spravochnik. Inzhenernyi zhurnal (Handbook. An Engineering journal with appendix), 2018, no. 8, pp. 14–23. (in Russ.)
  13. Egorov I.M., Aleksanin S.A., Fedosovsky M.E., Ptitsyna A.S. Journal of Instrument Engineering, 2014, no. 10, pp. 76–80 (in Russ.)
  14. Zakharenko Yu.G., Kononova N.A., Mosckalev A.A., Askarova E.F., Mikheyev E.A. Scientific and Technical Journal of Information Technologies, Mechanics and Optics, 2016, no. 2(16), pp. 338–344. DOI: 10.17586/2226-1494-2016-16-2-338-344 (in Russ.)
  15. Kosarevskiy S.V., Latypov V.N. Mathematical Models and Computer Simulations, 2011, no. 6(23), pp. 68–80. (in Russ.)
  16. Tong Q.B., Ding Z.L., Chen J.C., Ai L.L., and Yuan F. Journal of Physics: Conference Series (ISIST'2006), 2006, vol. 48, рр. 561.
  17. Rao Z. et al. International Symposium on Photoelectronic Detection and Imaging 2013: Micro/Nano Optical Imaging Technologies and Applications. – International Society for Optics and Photonics, 2013, vol. 8911, рр. 891109.
  18. Qiu Z. et al. Measurement Science and Technology, 2018, no. 11(29), pp. 115008.
  19. Ikonomov P., Okamoto H., Tanaka F., Kishinami T. Robotics, Automation. Proceedings. IEEE International Conference, 1995, рр. 550–555.
  20. (in Russ.)
  21. ISO I.E.C., OIML B. Guide to the Expression of Uncertainty in Measurement, Geneva, Switzerland, 1995.
  22. Balsamo A. et al. CIRP Annals-Manufacturing Technology, 1999, no. 1(48), pp. 425–428.