DOI 10.17586/0021-3454-2020-63-5-436-443
UDC 621.83; 621.941
Method of Calculation and Design of Small-Sized Cylindrical Kinematic Gears Made of Pol-ymer Composite Materials
ITMO University, Saint Petersburg, 197101, Russian Federation; Professor
E. V. Shalobaev
ITMO University, Saint Petersburg, 197101, Russian Federation; Professor
V. A. Zinkov
ITMO University;
Read the full article
Abstract. A methodology for calculating and designing small-sized cylindrical kinematic gears made of mainly structural polymer-composite materials is proposed. The technique consists of four main successive stages, in which the basic calculation formulas are presented. The features of the use of composite materials for gears are determined. Recommendations are given on improving the gear transmission parameters based on the experience of cone-wedge ring gears employment.
Keywords: small-sized cylindrical gears, gear calculation, polymer-composite materials, cone-wedge ring gear
References:
References:
- Starzhinsky V.E., Shalobayev E.V., Shil’ko S.V. Elementy privoda priborov: raschet, konstruirovaniye, tekhnologii (The Drive Elements of the Instrument: the Calculation, Designing, Technology), Pleskachevskiy Yu.M., ed., Minsk, 2012, 769 р. (in Russ.)
- Starzhinskiy V.E., Gavrilova O.V., Krauze V. et al. Plastmassovyye zubchatyye kolesa v peredachakh tochnogo priborostroyeniya (Plastic Gears in Precision Gear Transmissions), Minsk, 1993, 358 р. (in Russ.)
- Starzhinskiy V.E., Timofeyev B.P., Shalobayev E.V., Kudinov A.T. Plastmassovyye zubchatyye kolesa v mekhanizmakh priborov. Raschet i konstruirovaniye (Plastic Cogwheels in Mechanisms of Devices. Calculation and Designing), St. Petersburg, Gomel’, 1998, 538 р. (in Russ.)
-
Starzhinskiy V.E., Shalobayev E.V., Kudinov A.T. Spravochnik. Inzhenernyy zhurnal, 2001, no. 9,
pp. 11–13. (in Russ.) -
Shalobayev E.V., Gavrilenko S.L., Perepelitsa F.A., Krasnorutskaya N.S., Demidov G.A. Polimernyye kompozity i tribologiya. Polikomtrib-2017 (Polymer Composites and Tribology. Polycomtrib-2017),
Abstracts of reports of the International Conference, Gomel', June 27–30, 2017, Minsk, 2017,
рр. 205–206. (in Russ.) - Starzhinskiy V.E., Shil'ko S.V., Shalobayev E.V. Polimernyye materialy i tekhnologii, 2018, no. 2(4), pp. 6–31. (in Russ.)
- Dovydenko E.M., Ivanova N.A., Chizhik S.A., Agabekov V.E. Polimernyye materialy i tekhnologii, 2018, no. 2, pp. 85–90. (in Russ.)
- Demidov G.A., Karandashev A.N., Shalobayev E.V., Perepelitsa F.A., Shil'ko S.V., Starzhinskiy V.E. Polimernyye materialy i tekhnologii, 2019, no. 3(5), pp. 85–90. (in Russ.)
- https://www.tehnohacker.ru/texnologii/tehnologiya-3d-pechati-v-promyshlennosti/. (in Russ.)
- Polyakova D.A., Sokurenko Yu.A. Almanac of scientific works of young scientists of ITMO University, St. Petersburg, 2018, vol. 7, рр. 249–252. (in Russ.)
- https://www.designworldonline.com/polymers-outperform-metals-in-precision-gearing/.
- Shalobayev E.V., Medunetskiy V.M., Monakhov Yu.S. Sborka v mashinostroyenii, priborostroyenii, 2004, no. 11, pp. 31–34. (in Russ.)
-
Shalobayev E.V., Medunetskiy V.M., Monakhov Yu.S. Teoriya i praktika zubchatykh peredach (Theory and Practice of Gears), Abstracts of reports of the International Conference, Izhevsk, 2004,
рр. 139–144. (in Russ.) - Shalobayev E.V., Medunetskiy V.M., Magdiyev R.R., Starzhinskiy V.E., Shil'ko S.V. Izvestiya Tul'skogo gosudarstvennogo universiteta. Tekhnicheskiye nauki, 2012, no. 12-1, pp. 142–149. (in Russ.)
- Medunetskiy V.M., Shalobayev E.V., Reznikov S.S., Starzhinskiy V.E. Izvestiya Tul'skogo gosudarstvennogo universiteta. Tekhnicheskiye nauki, 2012, no. 12-1, pp. 107–116. (in Russ.)
- Medunetskiy V.M., Shalobayev E.V., Magdiyev R.R., Zaikin K.N., Surikov D.G. Sovremennoye mashinostroyeniye. Nauka i obrazovaniye, 2014, no. 4, pp. 400–407. (in Russ.)
- Typical Plastic Gear Applications, http://www.intechpower.com/products/gears/typical-gear-applications.
- Al'shits I.Ya., Blagov B.N. Proyektirovaniye detaley iz plastmass. Spravochnik (Design of plastic parts. Directory), Moscow, 1977, 215 р. (in Russ.)
- Mosyagin R.V., Pavlov B.I. Detali i uzly malogabaritnykh reduktorov (Details and Units of Small-Sized Gearboxes), Leningrad, 1967, 146 р. (in Russ.)
- Pavlov Ya.M. Detali mashin (Machine Parts), Leningrad, 1969, 448 р. (in Russ.)
- Ermakov V.A. Zubchatyye kolesa iz nemetallicheskikh materialov (Gear Wheels Made of Non-Metallic Materials), Moscow, 1966, 67 р. (in Russ.)
- Skorokhodov E.A. Spravochnik tekhnologa-priborostroitelya (Handbook of a Process Engineer), Moscow, 1980, vol. 2, 463 p. (in Russ.)
- Antonyuk V.E., Starzhinskiy V.E., Shalobayev E.V. et al. Tekhnologiya proizvodstva i metody obespecheniya kachestva zubchatykh koles i peredach (Production Technology and Methods for Ensuring the Quality of Gears and Gears), St. Petersburg, 2007, 832 р. (in Russ.)
- Medunetskiy V.M., Zinkov V.A. Morskoy vestnik, 2019, no. 1(69), pp. 112–114. (in Russ.)
- Medunetskiy V.M. Formoobrazovaniye modifitsirovannykh zubchatykh ventsov kombinirovannykh tsilindricheskikh peredach (Shaping of Modified Gear Rims of Combined Cylindrical Gears), Doctor’s thesis, St. Petersburg, 2003, 386 р. (in Russ.)
- Medunetskiy V.M., Shalobaev E.V., Zinkov V.A., Dang Nhan Thong, Journal of Instrument Engineering, 2019, no. 2(62), pp. 192–194 (in Russ.)
