ISSN 0021-3454 (print version)
ISSN 2500-0381 (online version)
Menu

1
Issue
vol 64 / January, 2021
Article

DOI 10.17586/0021-3454-2020-63-7-620-625

UDC 621.3.085.42

CORRECTION OF SINGLE ERRORS IN DIGITAL ANGLE CONVERTERS BASED ON RECURSIVE CODE SCALES

A. A. Ozhiganov
ITMO University, Department of Computation Technologies; Professor


P. . Pribytkin
JSC “Avangard “; Project manager


Read the full article 

Abstract. A block diagram of a digital angle converter with the ability to correct single errors is proposed. Implementation of the correction ability is achieved by application of recursive code scales with one in-formation code track in them. With such scales it is possible to generate correction codes read from them with a minimum code distance dmin = 3 by introduction of additional reading elements only (without the use of additional control code tracks).
Keywords: digital angle converter, recursive code range, pseudo-random code scale, compositional range code, reading elements, single error correction

References:
  1. Luk'yanov V.D., Ojiganov А.А. Datchiki & Systemi (Sensors & Systems). 2012, no. 2, pp. 13–16. (in Russ.)
  2. Alsuf'yev E., Bogatyrev V. Scientific and technical journal of information technologies, mechanics and optics, 2013, no. 4(86), pp. 45–49. (in Russ.)
  3. Domrachev V.G., Meyko B.S. Tsifrovyye preobrazovateli ugla: printsipy postroyeniya, teoriya tochnosti, metody kontrolya (Digital Angle Converters: Construction Principles, Accuracy Theory, Control Methods), Moscow, 1984, 328 р. (in Russ.)
  4. Rostovsky K.M. Questions of Radio Electronics, 2014, no. 2(1), pp. 209–220. (in Russ.)
  5. Asinovskiy E.N. et al. Vysokotochnyye preobrazovateli uglovykh peremeshcheniy (High-Precision Angle Encoders), Moscow, 1986, 128 р. (in Russ.)
  6. Berger J.M. Information and Control, 1961, no. 1(4), pp. 68–73.
  7. Sogomonyan E.S. Automation and Remote Control, 1974, no. 2, pp. 121–133. (in Russ.)
  8. Slabakov Е.V. Automation and Remote Control, 1979, no. 10, pp. 133–141. (in Russ.)
  9. Аksyonovа G.P. Automation and Remote Control, 1979, no. 9, pp. 126–135. (in Russ.)
  10. Efanov D.V., Sapozhnikov V.V., Sapozhnikov Vl.V. Automation and Remote Control, 2010, no. 6, pp. 155–162. (in Russ.)
  11. Sapozhnikov V.V., Sapozhnikov Vl.V., Efanov D.V. Journal of Instrument Engineering, 2015, no. 5(58), pp. 333–343. (in Russ.)
  12. Azov A.K., Ojiganov А.А., Tarasyuk M.V. Information Technologies (Informacionnye Tehnologii), 1998, no. 6, pp. 39–43. (in Russ.)
  13. Ojiganov А.А., Tarasyuk M.V. Journal of Instrument Engineering, 1997, no. 1(40), pp. 42–47. (in Russ.)
  14. Ojiganov А.А. Journal of Instrument Engineering, 1995, no. 7–8(38), pp. 33–36. (in Russ.)
  15. Ojiganov A. Lecture Notes in Electrical Engineering, 2011, vol. 79, pp. 263–288.
  16. Mitrofanov S.S. Opticheskiye i optiko-elektronnyye izmeritel'nyye pribory: Chast' I. Uchebnoye posobiye k vypolneniyu laboratornykh rabot (Optical and Optoelectronic Measuring Instruments: Part I. Textbook for Laboratory Work), St. Petersburg, 2010, 107 р. (in Russ.)
  17. Blahut R.E. Theory and Practice of Error Control Codes, 1984.
  18. Ozhiganov A.A., Azov A.K., Tarasyuk M.V. Information Technologies (Informacionnye Tehnologii), 2003, no. 1, pp. 47–51. (in Russ.)