ISSN 0021-3454 (print version)
ISSN 2500-0381 (online version)
Menu

1
Issue
vol 64 / January, 2021
Article

DOI 10.17586/0021-3454-2020-63-12-1128-1132

UDC 004.056.53

INCREASING THE OVERLAP RATIO IN INVOLUTE TRANSMISSION

B. P. Timofeev
ITMO University, Department of Mechatronics; Professor


H. T. Minh
ITMO University, Faculty of Control Systems and Robotics;


Abstract. Possibilities of increasing the end overlap coefficient in involute cylindrical gears of external engagement are investigated.
Keywords: transverse contact ratio, involute spur gear, initial contour, basic parameters

References:
  1. Khurmi R. et al. Theory of Machines, New Dehli, S. Chand & Co. Ltd., 2005, 1071 p.
  2. Jelaska D. University of Split-Croatia. Gears and Gear Drives, A John Wiley & Sons Ltd., 2012, 462 p.
  3. Colbourne J.R. The Geometry of Involute Gears, NY, Springer-Verlag Inc., 1987, 538 p.
  4. Radzevich S.P. Theory of Gearing. Kinematics, Geometry, and Synthesis, CRC Press, 2018, 935 p.
  5. Kudryavtsev V.N., Kuz'min I.S, Filipenkov A.L. Raschet i proyektirovaniye zubchatykh reduktorov (Calculation and Design of Gear Reducers), St. Petersburg, 1993, 448 р. (in Russ.)
  6. Timofeev B.P. Journal of Instrument Engineering, 1980, no. 6, pp. 19–23. (in Russ.)