DOI 10.17586/0021-3454-2021-64-11-949-954
UDC 620.17
INFLUENCE OF STRUCTURAL FEATURES OF CONSTRUCTION POLYMER-COMPOSITE MATERIALS ON THE PHYSICAL AND MECHANICAL PROPERTIES OF PRODUCTS
ITMO University, Department of Mechatronics; senior lecturer
V. M. Medunetskiy
ITMO University, Saint Petersburg, 197101, Russian Federation; Professor
S. Y. Perepelkina
Peter the Great St. Petersburg Polytechnic University, Saint Petersburg, 195251. Russian Federation; Associate Professor
A. G. Surikov
ITMO University, Saint Petersburg, 197101, Russian Federation; Senior Researcher
Read the full article
Abstract. A brief overview of construction polymer-composite materials with an indication of their main properties is presented. It is noted that these materials are advisable to use in the manufacture of products of complex shapes, in particular gears with a complex configuration of gear rings. Results of experiments with structural polymer materials to study their characteristics of friction and tensile strength, carried out using the universal friction machine MTU-1 and SHIMAZU AGS-500X machine, are presented. Samples of polymer parts are made using FDM technology. Presented graphs showing dependence of the friction coefficient and ultimate tensile strength on the filling factor of polymer samples, are to be taken into account in the design and manufacture of parts.
Keywords: construction polymer materials, coefficient of friction, tensile strength
References:
References:
- González-Henríquez C.M., Sarabia-Vallejos M.A., & Rodriguez-Hernandez J. Materials, methodologies, and biomedical applications. Progress in Polymer Science, 2019, vol. 94, рр. 57–116, DOI: 10.1016/j.progpolymsci.2019.03.001.
- Ghosh R., Ghosh S., Srivastava T., & Barman R.N. International Journal of Engineering and Technology, 2017, no. 2(9), pp. 1438–1451, DOI: 10.21817/ijet/2017/v9i2/170902285.
- Chatterjee S., & Gupta K. Advances in Modelling and Analysis C, 2018, no. 3(73), pp. 79–83, DOI: 10.18280/ama_c.730301, http://iieta. org/Journals/AMA/AMA_C.
- Pawar P.B., Utpat A.A. Materials Today: Proceedings, 2015, no. 2, pp. 2968–2974, DOI: 10.1016/j.matpr.2015.07.278.
- Thirugnanam A., Sathish J., & Rakesh L. Middle-East Journal of Scientific Research, 2014, no. 8(20), pp. 966–968, DOI: 10.5829/idosi.mejsr.2014.20.08.114144.
- Mao K., Greenwood D., Ramakrishnan R., Goodship V., Shrouti C., Chetwynd D., & Langlois P. Wear, 2019, vol. 426, рр. 1033–1039, DOI: 10.1016/j.wear.2018.12.043.
- Catera P.G., Mundo D., Gagliardi F., & Treviso A. International Journal on Interactive Design and Manufacturing (IJIDeM), 2020, рр. 1–16, DOI: 10.1007/s12008-020-00647-y.
- Catera P.G., Mundo D., Treviso A., Gagliardi F., & Visrolia A. Applied Composite Materials, 2019, no. 3(26), pp. 817–833, DOI: 10.1007/s10443-018-9753-6.
- Gauntt S.M., & Campbell R.L. AIAA Scitech 2019 Forum, 2019, рр. 0146, DOI: 10.2514/6.2019-0146.
- Singh A.K., Yadav S., & Singh P.K. Advances in Engineering Design, Springer, Singapore, 2019, рр. 269–277, DOI: 10.1007/978-981-13-6469-3_24.
- https://www.totalmateria.com/page.aspx?ID=Home&LN=RU. (in Russ.)
- https://www.materialdatacenter.com/mb/.
- https://plastinfo.ru/m-base/. (in Russ.)
- Andreev M.V., Kryazhev Yu.A., Shityuk A.A. Innovatsii v mashinostroyenii (INMASH – 2018) (Innovations in Mechanical Engineering (INMASH - 2018)), Collection of Works of the IX International Scientific and Practical Conference, Barnaul, October 24–26, 2018. рр. 491–497. (in Russ.)
- Friedrich K., & Walter R., ed., Structure and Properties of Additive Manufactured Polymer Components, Woodhead Publishing, 2020, DOI: 10.1016/C2018-0-03664-6.
- Goh G.D., Yap Y.L., Tan H.K.J., Sing S.L., Goh G.L., & Yeong W.Y. Critical Reviews in Solid State and Materials Sciences, 2020, no. 2(45), pp. 113–133, DOI: 10.1080/10408436.2018.1549977.
- Milisavljević J., Petrović E., Ćirić I., Mančić M., Marković D., Đorđević M. DAS-29, 29th Danubia-Adria Symposium, University of Belgrade, Serbia, 2012, рр. 266–269.
- Perepelkina S., Kovalenko P., Pechenko R. Procedia Engineering, 2017, vol. 176, pp. 301–309.