Reference for citation: Yudin S. A., Andreev Yu. S., Ostashkov A. V. Method for determining the rational modes of the technological operation of finishing flat surfaces with a bonded abrasive. Journal of Instrument Engineering. 2023. Vol. 66, N 7. P. 612—622 (in Russian). DOI: 10.17586/0021-3454-2023-66-7-612-622.

Abstract. Piezoelectric vibration sensors are among the most used sensors for measuring mechanical vibrations. The technological operation of finishing flat parallel surfaces with fixed abrasive is considered. An algorithm for determining rational modes of fine-tuning is presented, and the method based on planning experimental studies by Taguchi and dispersion analysis is described. The conditions for manufactory prototypes are described. Intermediate results of experimental studies are presented, the possibility to exclude the grinding operation from the technological process before finishing is demonstrated.

Keywords: roughness, piezoelectric vibration sensor, flatness tolerance, parallelism tolerance, relative coefficient of transverse transformation, finishing, Taguchi method, dispersion analysis, determination of finishing modes

References:

1. Kiselev Yu.V., Kiselev D.Yu., Tits S.N. Vibratsionnaya diagnostika sistem i konstruktsiy aviatsionnoy tekhniki (Vibration Diagnostics of Systems and Structures of Aviation Equipment), Samara, 2012, 207 р. (in Russ.)
2. Sharapov V.M., Musienko M.P., Sharapova E.V. P'yezoelektricheskiye datchiki (Piezoelectric Sensors), Moscow, 2006, 632 р. (in Russ.)
3. Yanchin V.V. P'yezoelektricheskiye datchiki vibratsionnogo i udarnogo uskoreniya (Piezoelectric Vibration and Shock Acceleration Sensors), Rostov-on-Don, 2008, 77 р. (in Russ.)
4. Yudin S.A., Asharchuk A.V. Almanac of Scientific Works of Young Scientists at ITMO University, 2021, vol. 2, рр. 249–252. (in Russ.)
5. Isaev R.M. Vliyaniye kachestva poverkhnostey funktsional'nykh detaley p'yezoelektricheskikh datchikov vibratsii na ikh ekspluatatsionnyye kharakteristiki (Influence of Surface Quality of Functional Parts of Piezoelectric Vibration Sensors on Their Operational Characteristics), Candidate’s thesis, St. Petersburg, 2017, http://fppo.ifmo.ru/?page1=16&page2=86&number_file=E023BAE9C97B17E23B203506C0E74B33. (in Russ.)
6. Andreev Yu.S., Demkovich N.A., Isaev R.M., Tselishchev A.A., Vasilkov S.D. Scientific and Technical Journal of Information Technologies, Mechanics and Optics, 2016, no. 6(16), pp. 1103–1110. (in Russ.)
7. Andreev Y.S., Demkovich N.A., Isaev R.M., Tselischev A.A., Vasilkov S.D. Procedia Engineering, Elsevier, 2017, vol. 176, рр. 96–106.
8. Yudin S.A., Isaev R.M. Journal of Instrument Engineering, 2023, vol. 66 no. 1, рр. 66–73. (in Russ.)
9. Valetov V.A., Yulmetova O.Yu. Scientific and Technical Journal of Information Technologies, Mechanics and Optics, 2008, no. 48, pp. 140–142. (in Russ.)
10. Valetov V.A. Technology of hull building, ship engineering and welding in shipbuilding, 1978, рр. 62–65. (in Russ.)
11. Valetov V.A., Andreev Yu.S., Tsimbal I.R. Tribology and reliability, St. Petersburg, 2010, рр. 85–92. (in Russ.)
12. Valetov V.A., Filimonova E.A. Journal of Instrument Engineering, 2014, vol. 57, no. 8, рр. 52–54. (in Russ.)
13. Medunetsky V.M., Vasilkov S.D. Journal of Instrument Engineering, 2016, vol. 59, no. 3, рр. 231–236. (in Russ.)
14. Gibadullin I.N., Valetov V.A. Journal of Instrument Engineering, 2019, vol. 62, no. 1, рр. 86–92. (in Russ.)
15. Yulmetova O.S. Razrabotka tekhnologicheskikh metodov upravleniya funktsional'nymi kharakteristikami uzlov giropriborov (Development of Technological Methods for Controlling the Functional Characteristics of Gyro Devices), Candidate’s thesis, St. Petersburg, 2011, 120 р. (in Russ.)
16. Kosilova A.G., Meshcheryakov R.P. Spravochnik tekhnologa-mashinostroitelya (Handbook of a Mechanical Engineering Technologist), vol. 1, Moscow, 1986, 656 р. (in Russ.)
17. Gashev E.A. Povysheniye effektivnosti dovodki i polirovaniya plastin integral'noy optiki (Increasing the Efficiency of Finishing and Polishing Integrated Optics Wafers), Candidate’s thesis, Rybinsk, 2018. (in Russ.)
18. 72047.919.00.000 RE «Rukovodstvo po ekspluatatsii poluavtomata dovodochnogo dvukhdiskovogo PD2S-902M» (72047.919.00.000 RE "Operation manual for semi-automatic finishing double-disk PD2S-902M"), Saratov, 2007. (in Russ.)
19. Korneva M.I. News of the Tula State University. Technical Sciences, 2011, no. 6-2. (in Russ.)
20. Das P., Samanta S.K., Das R., Dutta P. Measurement, Elsevier, 2014, vol. 55, рр. 605–615.