Abstract. A hardware-software complex for rods control is developed. The complex performance is investigated in various hardware configurations that implements the mirror-shadow method of non-destructive control with the use of multiple reflections on the passing electromagnetic-acoustic transducer. The scanning speed is measured at various parameters of the object under control. The influence of component characteristics on the performance of the complex is estimated. The possibility of a compromise between the maximum possible scanning speed of the rod, the length of the acoustic path, and the size of the recorded echograms is demonstrated based on the balance between the computer performance and registration system capacity. The developed system may be used for solving several problems of structural analysis, thickness gauging, and flaw detection by EMA method.

Keywords: performance, mirror-shadow method using multiple reflections, scanning, Hardwaresoftware complex

References:

1. Gurevich S.Yu., Petrov Yu.V. Technical Physics, 2016, no. 3(86), рр. 114–117. (in Russ.)
2. Len'kov S.V., Fedorova N.V. The Physics of Metals and Metallography, 2014, no. 8, рр. 800. (in Russ.)
3. Matvienko A.F., Korzunin G.S., Loskutov V.E.L., Babkin S.A. Russian Journal of Nondestructive Testing, 2015, no. 9, рр. 28–37. (in Russ.)
4. Murav'ev V.V., Volkova L.V. Russian Journal of Nondestructive Testing, 2013, no. 9, рр. 40–46. (in Russ.)
5. Budenkov G.A., Korobeynikova O.V. Russian Journal of Nondestructive Testing, 2009, no. 4, рр. 41–49. (in Russ.)
6. Suchkov G.M., Khashchina S.V., Petrishchev O.N. Technical Diagnostics and Nondestructive Testing, 2012, no. 1, рр. 23–28. (in Russ.)
7. Suchkov G.M., Petrishchev O.N., Khashchina S.V., Desyatnichenko A.V., Nozdracheva E.L. Kontrol’. Diagnostika (Testing. Diagnostics), 2013, no. 4, рр. 31–35. (in Russ.)
8. Murav'ev V.V., Murav'eva O.V., Strizhak V.A., Volkova L.V., Balobanov E.N. Akusticheskaya tenzometriya i strukturoskopiya zheleznodorozhnykh koles (Acoustic Strain Measurement and Structuroscopy Railway Wheels), Izhevsk, 2014, 180 р. (in Russ.)
9. Gobov Yu.L., Mikhaylov A.V., Smorodinskiy Ya.G. Russian Journal of Nondestructive Testing, 2014, no. 11, pp. 48–56. (in Russ.)
10. Mikhaylov A.V., Gobov Yu.L., Smorodinskiy Ya.G., Shcherbinin S.V. Russian Journal of Nondestructive Testing, 2015, no. 8, pp. 14–23. (in Russ.)
11. Murav'ev V.V., Strizhak V.A., Khasanov R.R. Intellekt. Sist. Proizv. (Intelligent Systems in Manufacturing), 2016, no. 2(29), pp. 71–75. (in Russ.)
12. Strizhak V.A., Pryakhin A.V., Obukhov S.A., Efremov A.B. Intellekt. Sist. Proizv. (Intelligent Systems in Manufacturing), 2011, no. 1, pp. 243–250. (in Russ.)
13. Murav'eva O.V., Murav'ev V.V., Strizhak V.A., Kokorina E.N., Loyferman M.A. V mire nerazrushayushchego kontrolya (V MIRE NK), 2013, no. 1, pp. 52–60. (in Russ.)
14. Murav'eva O.V., Murav'ev V.V., Gabbasova M.A. Russian Journal of Nondestructive Testing, 2015, no. 12, pp. 11–19. (in Russ.)
15. Murav'eva O.V., Petrov K.V., Sokov M.Yu., Gabbasova M.A. Russian Journal of Nondestructive Testing, 2015, no. 7, pp. 17–23. (in Russ.)
16. Ermolov I.N., Lange Yu.V. Nerazrushayushchiy kontrol': Spravochnik. T. 3. Ul'trazvukovoy kontrol' (Nondestructive Control. Reference book. Vol. 3. Ultrasonic Control), Moscow, 2004, 864 р. (in Russ.)
17. Evlampiev A.I., Popov E.D., Sazhin S.G., Fedosenko Yu.K., Gerasimov V.G., Pokrovskiy A.D., Ostanin Yu.Ya. Nerazrushayushchiy kontrol'. Spravochnik. T. 2. Vikhretokovyy kontrol' (Nondestructive Control: Reference book. Vol. 2. Eddy Current Testing), Moscow, 2006, 688 р. (in Russ.)