ISSN 0021-3454 (print version)
ISSN 2500-0381 (online version)

vol 64 / January, 2021

DOI 10.17586/0021-3454-2018-61-2-123-128

UDC 531.01


M. G. Akopyan
Research and Production Enterprise "ADVENT";

Read the full article 

Abstract. Mathematical simulation method accounting for continuous changes in the teeth shape is used for investigation of regularities of gears wear. Parameters of all investigated pairs of gears and conditions of their joint application are given. Conditions and limitations on possible application of the obtained results are analyzed, basic relations used for calculating the linkage parameters are presented. The data of modelling are used to draw graphs of the distribution of wear during the initial period of contact and make several conclusions about the wear nature. The change in the line of engagement of the wheel and gear during the running-in of the gearing elements is demostrated. The conditions of occurrence and development of the position error are analyzed. The cause of the growth of the cyclic error and the consequence of uneven wear are determined. The graphs of redistribution of wear in the areas of double-pair gearing during wear are presented, conclusions are drawn about its nature, as well as the tooth profiles and the engagement line. The cause of stabilization of a cyclic error is determined and the schedule of its changes is given. A graph is given of the variation of the dead stroke during the meshing of the gears. Conclusions about the nature and regularities of wear of spur gears are formulated.
Keywords: gear tops, cogwheel wear, evolution model of wearing, dependences of wearing, dead run

  1. Reznikov S.S., Akopyan M.G., Petrov A.I. NAUKOVEDENIE, 2016, no. 1(8), Russ.)
  2. Akopyan M.G. University proceedings. Volga region. Technical sciences, 2017, no. 3(43), pp.107–121. (in Russ.)
  3. Akopyan M.G., Reznikov S.S., Fedotova V.N. Nauchno-tekhnicheskie vedomosti SPbGPU(St. Petersburg State Polytechnical University Journal), 2017, no. 1(23), pp. 184–189. (in Russ.)
  4. Ayrapetov E.L. Sostoyanie i perspektivy razvitiya metodov rascheta nagruzhennosti i prochnosti peredach zatsepleniem (State and Prospects of Development of Methods of Calculation of Loading and Durability of Transfers with Gearing), Moscow–Izhevsk, 2000, 118 р. (in Russ.)
  5. Baranov A.V., Vagner V.A., Tarasevich S.V., Baranova Yu.A., Ponomareva A.N. Polzunovsky vestnik, 2010, no. 1, pp. 99–105. (in Russ.)
  6. Onishchenko V.P., Goldobin V.A. Vіsnik Skhіdnoukraїns'kogo unіversitetu іmenі Volodimira Dalya, 2007, no. 9(115), pp. 165–171. (in Russ.)
  7. Onishchenko V.P. Progressivnye tekhnologii i sistemy mashinostroeniya. Mezhdunarodnyy sbornik nauchnykh trudov (Progressive Technologies and Systems of Mechanical Engineering. International Collection of Scientific Works), Donetsk, 1998, no. 5, pp. 155–163. (in Russ.)
  8. Bakhanovich A.G. Mechanics of Machines, Mechanisms and Materials, 2010, no. 1(10), pp. 21–28. (in Russ.)
  9. Varsimashvili R.Sh., Kakhiani M.R., Varsimashvili Z.R. Progresivnі tekhnologії і sistem i mashinobuduvannya, 2013, no. 1(45), pp. 77–84. (in Russ.)
  10. Reznikov S.S. Vestnik of Lobachevsky University of Nizhni Novgorod, 2011, no. 2(4), pp. 296–298. (in Russ.)
  11. Khrushchev M.M. Laboratornye metody ispytaniya na iznashivanie materialov zubchatykh koles (Laboratory Test Methods on Wear of Materials of Cogwheels), Moscow, 1966, 152 р. (in Russ.)
  12. Chasovnikov L.D. Peredachi zatsepleniem (zubchatye i chervyachnye) (Transfers by Gearing (Gear and Worm)), Moscow, 1969, 486 р. (in Russ.)
  13.  Michaelis K., Brinck P. Antriebstechnik, 1983, no. 12(22), pp. 47–48.
  14. Winter H., Plewe H. Antriebstechnik, 1982, no. 5(21), pp. 231–237.
  15.  Winter H., Plewe H. Antriebstechnik, 1982, no. 6(21), pp. 282–286.
  16. Adam G. Schmierungstechnik, 1979, no. 7(10), pp. 206–209.