ISSN 0021-3454 (print version)
ISSN 2500-0381 (online version)

vol 66 / April, 2023

DOI 10.17586/0021-3454-2017-60-5-426-430

UDC 681.6.012


A. N. Filippov
ITMO University, Department of Instrumentation Technology; Associate Professor

E. A. Kopasov
Limited Liability Company Ilka-LAN; General Director

K. P. Ivashkova
ITMO University, Department of Instrumentation Technologies; Student

Read the full article 

Abstract. Current problems of additive technologies are considered. The importance of automating solution to the problem of elimination of defects of parts produced using 3D printing. A classification of the defects by their origin is presented. Developed facilities. An optional menu for searching instructions used to find a solution to the problem based on the string of the virtual space of the process data is developed.
Keywords: additive technologies, 3D printing, database, virtual space

  1. Shevchenko D.Yu. Kompleksnye problemy razvitiya nauki, obrazovaniya i ekonomiki regiona, 2015, no. 2(7), рр. 89–97. (in Russ.)
  2. Yablochnikov E.I., Pirogov A.V., Gribovskiy A.A. Journal of Instrument Engineering, 2014, no. 5(57), рр. 72–76. (in Russ.)
  3. Medunetskiy V.M., Romanov N.A. Journal of Instrument Engineering, 2015, no. 5(58), рр. 397–400. (in Russ.)
  4. Zlenko M.A., Nagaytsev M.V., Dovbysh V.M. Additivnye tekhnologii v mashinostroenii (Additive Technologies in Mechanical Engineering), Moscow, 2015, 220 р. (in Russ.)
  6. Val'ster V. Tendentsii v avtomatizatsii, 2014, no. 14. (in Russ.)
  7. Vakin V.V. Postroenie ekspertnoy sistemy diagnostiki defektov vrashchayushchikhsya mekhanizmov (Building Expert System for Diagnosis of Defects in Rotating Machinery), Extended abstract of candidate’s thesis, Moscow, 2000. (in Russ.)
  8. Filippov A.N. Virtual'noe strokovoe prostranstvo tekhnologicheskikh dannykh i znaniy (Virtual Line Space of Technological Data and Knowledge), St. Petersburg, 2015, 80 р. (in Russ.)
  9. Verkhoturova Yu.S. Vestnik BGU, 2012, no. 15, рр. 32–37. (in Russ.)