DOI 10.17586/0021-3454-2019-62-1-86-92
UDC 621.81.004.17: 620.191.355.001.5
IMAGE OF THE SURFACE PROFILE AS A GRAPHIC CRITERION OF ITS ROUGHNESS
ITMO University, Department of Instrumentation Technology; Student
V. A. Valetov
ITMO University;
Read the full article
Abstract. A method of estimation and control of surface roughness of instrument parts using graphical criteria is proposed. In particular, image of surface profile may be used as the criterion. To implement the method, a special software is developed to qualitatively assess the degree of similarity of profiles of the surfaces under consideration. Results of the study of application possibility of the developed technique to real surfaces obtained by various processing methods are presented.
Keywords: surface roughness, functional surface properties, surface roughness control, surface profile, graphic criteria
References:
References:
- Valetov V.A., Gibadullin I.N. Metalloobrabotka, 2017, no. 5(101), pp. 38–43. (in Russ.)
- Tabenkin A.N., Tarasov S.B., Stepanov S.N. Sherokhovatost’, volnistost’, profil’. Mezhdunarodnyy opyt (Roughness, Waviness, Profile. International Experience), St. Petersburg, 2007, 136 р. (in Russ.)
- Valetov V.A. Journal of Instrument Engineering, 2015, no. 4(58), pp. 250–267. (in Russ.)
- Valetov V.A. Proceedings of Leningrad Shipbuilding Institute, 1976, no. 108, pp. 135–140. (in Russ.)
- Valetov V.A., Ivanov A.Yu. Journal of Instrument Engineering, 2010, no. 8(53), pp. 6–11. (in Russ.)
- Filimonova E.A. Razrabotka metodiki i programmy avtomatizirovannogo kontrolya mikrogeometrii poverkhnostey detaley priborov s pomoshch’yu graficheskikh kriteriyev i ikh ispol’zovaniye v tekhnologicheskikh issledovaniyakh (Development of a Technique and the Program for Automated Control of Surfaces Microgeometry of Details of Devices by Means of Graphic Criteria and Their use in Technological Researches), Candidate’s thesis, St. Petersburg, 2014, р. 125. (in Russ.)
- Andreyev Yu.S., Medunetskiy V.V. Journal of Instrument Engineering, 2012, no. 9(55), pp. 30–34. (in Russ.)
- Valetov V.A., Filimonova E.A. Journal of Instrument Engineering, 2014, no. 8(57), pp. 52–54. (in Russ.)
- Tret’yakov S.D., Yul’metova O.S. Journal of Instrument Engineering, 2010, no. 8(53), pp. 12–15. (in Russ.)
- Ivanov A.Y., Leonov D.B. Fundamental Sciences and Applications: Journal of the Techn. Univ. Sofia (Plovdiv branch), Bulgaria, 2012, vol. 17, рр. 19–23.
- Certificate on the state registration of the computer programs 2011613843, Programma avtomatizirovannogo kontrolya mikrogeometrii poverkhnostey s pomoshch’yu neparametricheskikh kriteriyev (The Program of Automated Control of Surface Microgeometry Using Nonparametric Criteria), Valetov V.A., Filimonova E.A., Published 18.05.2011. (in Russ.)
- Certificate on the state registration of the computer programs 2014614458, Programma avtomatizirovannogo kontrolya i otsenki mikrogeometrii poverkhnostey s pomoshch’yu mikrotopografiy (The Program of Automated Control and Assessment of Microgeometry of Surfaces by Means of Microtopography), Valetov V.A., Filimonova E.A., Priority 03.03.2014, Published 24.04.2014. (in Russ.)
- Tret’yakov S.D., Yul’metova O.S., Filimonova E.A. Journal of Instrument Engineering, 2014, no. 8(57), pp. 58–60. (in Russ.)
