DOI 10.17586/0021-3454-2019-62-10-941-946
UDC 621.833
METHOD OF IMPROVING THE ACCURACY IN THE ASSEMBLY OF SMALL-MODULE GEARS
ITMO University, Department of Mechatronics; Professor
N. T. Dang
ITMO University, Faculty of Control Systems and Robotics;
Read the full article
Abstract. Assembling of small-gear cylindrical gears is considered from the point of view of the require-ment to minimize the kinematic error in accordance with State Standards 9178-81 and 1643-81. A meth-od is proposed for calculating and minimizing the kinematic error of gears consisting of wheels with po-sition errors equal to the maximum permissible values specified by the GOST. Estimates of the kinemat-ic error are presented, recommendations for choosing the relative position of the gears in the process of gear assembly are formulated. The cases of assembly with multiple and non-multiple gear ratios are considered separately.
Keywords: kinematic error, GOST 9178-81, GOST 1643-81, exhibition effect, minimization, initial phases of harmonic components, degree of accuracy
References:
References:
- Timofeyev B.P. Pribory, 2013, no. 9(159), pp. 37–40. (in Russ.)
- Abramchuk M.V. Tekhnologiya Mashinostroeniya, 2013, no. 1, pp. 64–68. (in Russ.)
- Timofeyev B.P., Abramchuk M.V. Standards and Quality, 2010, no. 5, pp. 60–63. (in Russ.)
- Li X., Yang Y., Zou Z. International Journal of Advanced Manufacturing Technology, 2019, no. 1-4(100), pp. 179–188.
- Luo M., Zhong S. Applied Sciences (Switzerland), 2018, no. 8(12), pp. 3–6.
- Zhang Y., Wang G., Shi W. Journal of Materials Engineering and Performance, 2018, no. 8(27), pp. 3803–3811.
- Timofeev B., Sachkov M. Mechanisms and Machine Science, 2018, no. 51, pp. 419–434.
- Wang B., Du Y., Xu N. Measurement: Journal of the International Measurement Confederation, 2019, no. 138, pp. 570–577.
- Huang X., Yuan Y., Ouyang T. Journal of Southeast University (Natural Science Edition), 2018, no. 4(48), pp. 605–612.
- Timofeev B.Р., Sachkov M.Yu. Peredatochnyye mekhanizmy privodov (Drive Gears), St. Petersburg, 2015, 103 р. (in Russ.)
- Timofeyev B.P., Novikov D.V. Vestnik mashinostroyeniya, 2013, no. 5, pp. 85–87. (in Russ.)
- Boral P., Stoić A., Kljajin M. PLoS ONE, 2018, no. 3(25), pp. 798–802.
- Zhou Y., Chen Z.C., Tang J. CAD Computer Aided Design, 2017, no. 84, pp. 15–24.
- Wang X., Shi Z. Scientia Sinica Technologica, 2017, no. 1(47), pp. 46–59.
