DOI 10.17586/0021-3454-2020-63-3-250-256
UDC 681.7.068
Digital Format for Preparation of Instrument Production. Part II. Technological stage
Vologda State University, Department of Engineering Technologies; PhD, Associate Professor
T. G. Bulavina
Vologda State University, Department of Engineering Technologies; Associate Professor
V. V. Yakhrichev
Vologda State University, Department of Engineering Technologies; Senior Lecturer
A. S. Stepanov
Vologda State University, Department of Engineering Technologies;
Read the full article
Abstract. The process of introducing innovative digital technologies during the technological stage of pre-production at medium and small instrument-making enterprises is considered. At this stage, a complete package of technical documentation is generated. The program "Vertical" is presented in detail, which provides the possibility of parallel work of process engineers in the design of complex engineering and technological objects in real time. An example of a control program based on a computer-aided manufacturing system is demonstrated; the application allows for visualization of the software product operation.
Keywords: 3D model, digital image, production technology, information environment
References:
References:
- Schuh G., Anderl R., Gausemeier J., ten Hompel M., Wahlster W., eds., Managing the Digital Transformation of Companies, Munich: Herbert Utz, 2017.
- Borovkov A.I., Ryabov Yu.A. XVII Aprel'skaya mezhdunarodnaya nauchnaya konferentsiya po problemam razvitiya ekonomiki i obshchestva (XVII April International Scientific Conference on the Problems of Economic and Social Development, Moscow, April 19–22, 2016), Moscow, 2017, vol. 3, рр. 381–389. (in Russ.)
- http://assets.fea.ru/uploads/fea/news/2017/11_november/17/tsifrovoe_proizvodstvo_112017.pdf. (in Russ.)
- Piters D. SAPR i grafika (CAD and graphics), 2016, no. 1, pp. 4–7. (in Russ.)
- Zil'berburg L.I., Molochnik V.I., Yablochkov E.I. Informatsionnyye tekhnologii v proyektirovanii i proizvodstve (Information Technology in Design and Production), St. Petersburg, 2008, 304 р. (in Russ.)
- Bulavin V.F., Yakhrichev V.V., Stepanov A.S. Proceedings of Higher Educational Institutions. Маchine Building, 2019, no. 9, pp. 35–45, DOI:10.18698/0536-1044-2019-9-35-45. (in Russ.)
- Bulavin V.F., Yakhrichev V.V., Glazkov V.A. Proceedings of Higher Educational Institutions. Маchine Building, 2018, no. 8, pp. 37–49, DOI:10.18698/0536-1044-2018-8-37-49. (in Russ.)
- Bulavin V.F., Bulavina T.G., Yakhrichev V.V. Fundamental and Applied Problems of Technics and Technology, 2017, no. 5(325), pp. 64–72. (in Russ.)
- Bykov A., Karabcheyev K. SAPR i grafika (CAD and graphics), 2016, no. 1, pp. 18–19. (in Russ.)
- Bulavin V.F., Yakhrichev V.V. SAPR i grafika (CAD and graphics), 2018, no. 6, pp. 52–55. (in Russ.)
- Volkov E.V., Kuz'mina M.S., Pomeshchikov V.E., Bulavin V.F., Grigor'yev N.S., Yakhrichev V.V. Eurasian Scientific Association, 2017, no. 10(32), pp. 65–68. (in Russ.)
- Yakhrichev V.V., Blagovestova M.E., Kazakova S.A., Nesterova A.A., Stoletova A.N., Panchenko E.N., Gromov A.A., Bulavin V.F. Eurasian Scientific Association, 2018, no. 1(35), pp. 70–73. (in Russ.)
- Lovygin А. SAPR i grafika (CAD and graphics), 2016, no. 1, pp. 8–17. (in Russ.)
- Vvedeniye v tekhnologiyu dinamicheskogo frezerovaniya v MasterCam ( Introduction to Dynamic Milling Technology at MasterCam), Moscow, 2016, 126 р. (in Russ.)
- Nikiforov A.D., Bakiyev A.V. Protsessy zhiznennogo tsikla produktsii v mashinostroyenii (Product Life Cycle Processes in Mechanical Engineering), Moscow, 2011, 688 р. (in Russ.)
