DOI 10.17586/0021-3454-2020-63-7-620-625
UDC 621.3.085.42
CORRECTION OF SINGLE ERRORS IN DIGITAL ANGLE CONVERTERS BASED ON RECURSIVE CODE SCALES
ITMO University, Department of Computation Technologies; Professor
P. . Pribytkin
JSC “Avangard “; Project manager
Read the full article
Abstract. A block diagram of a digital angle converter with the ability to correct single errors is proposed. Implementation of the correction ability is achieved by application of recursive code scales with one in-formation code track in them. With such scales it is possible to generate correction codes read from them with a minimum code distance dmin = 3 by introduction of additional reading elements only (without the use of additional control code tracks).
Keywords: digital angle converter, recursive code range, pseudo-random code scale, compositional range code, reading elements, single error correction
References:
References:
- Luk'yanov V.D., Ojiganov А.А. Datchiki & Systemi (Sensors & Systems). 2012, no. 2, pp. 13–16. (in Russ.)
- Alsuf'yev E., Bogatyrev V. Scientific and technical journal of information technologies, mechanics and optics, 2013, no. 4(86), pp. 45–49. (in Russ.)
- Domrachev V.G., Meyko B.S. Tsifrovyye preobrazovateli ugla: printsipy postroyeniya, teoriya tochnosti, metody kontrolya (Digital Angle Converters: Construction Principles, Accuracy Theory, Control Methods), Moscow, 1984, 328 р. (in Russ.)
- Rostovsky K.M. Questions of Radio Electronics, 2014, no. 2(1), pp. 209–220. (in Russ.)
- Asinovskiy E.N. et al. Vysokotochnyye preobrazovateli uglovykh peremeshcheniy (High-Precision Angle Encoders), Moscow, 1986, 128 р. (in Russ.)
- Berger J.M. Information and Control, 1961, no. 1(4), pp. 68–73.
- Sogomonyan E.S. Automation and Remote Control, 1974, no. 2, pp. 121–133. (in Russ.)
- Slabakov Е.V. Automation and Remote Control, 1979, no. 10, pp. 133–141. (in Russ.)
- Аksyonovа G.P. Automation and Remote Control, 1979, no. 9, pp. 126–135. (in Russ.)
- Efanov D.V., Sapozhnikov V.V., Sapozhnikov Vl.V. Automation and Remote Control, 2010, no. 6, pp. 155–162. (in Russ.)
- Sapozhnikov V.V., Sapozhnikov Vl.V., Efanov D.V. Journal of Instrument Engineering, 2015, no. 5(58), pp. 333–343. (in Russ.)
- Azov A.K., Ojiganov А.А., Tarasyuk M.V. Information Technologies (Informacionnye Tehnologii), 1998, no. 6, pp. 39–43. (in Russ.)
- Ojiganov А.А., Tarasyuk M.V. Journal of Instrument Engineering, 1997, no. 1(40), pp. 42–47. (in Russ.)
- Ojiganov А.А. Journal of Instrument Engineering, 1995, no. 7–8(38), pp. 33–36. (in Russ.)
- Ojiganov A. Lecture Notes in Electrical Engineering, 2011, vol. 79, pp. 263–288.
- Mitrofanov S.S. Opticheskiye i optiko-elektronnyye izmeritel'nyye pribory: Chast' I. Uchebnoye posobiye k vypolneniyu laboratornykh rabot (Optical and Optoelectronic Measuring Instruments: Part I. Textbook for Laboratory Work), St. Petersburg, 2010, 107 р. (in Russ.)
- Blahut R.E. Theory and Practice of Error Control Codes, 1984.
- Ozhiganov A.A., Azov A.K., Tarasyuk M.V. Information Technologies (Informacionnye Tehnologii), 2003, no. 1, pp. 47–51. (in Russ.)